WhoseID RFID readers RFID EMID Micro Chip Reader Scanner 134.2kHz

Handheld RFID readers support ISO 11784/11785, FDX-B and ID64 RFID, easy to operate, one-key reading. Note: 9-digit IDs are not recognized. Only 15-bit international standard protocol (134.2 kHz) is recognized. Card reader cannot read AVID chip

RFID readers 5-12cm reading range, suitable for Windows 98 or later software. Up to 128 tag information can be saved, which you can upload to a computer via a USB cable

1. Press the button to start the device and enter scan mode to start scanning labels. 2. If no tag is scanned, the reader will enter standby state. 3. Place a label in the antenna loop and press the button to read. 4. Press the button to read the next label. 5. If no label is scanned, the device will automatically shut down after 180 seconds, or you can press and hold the button for 3 seconds to shut down.

Handheld reader with backlit screen, easy to read. OLED display, can read in sunlight

Each microchip scanner will be attached to a tag or microchip as a gift, the tag can record pet information on our website. Once a pet is lost, people can contact the pet owner through the tab on our website. A tool with a microchip can implant the chip into an animal.