ZHIBAOHUA Grinding and polishing machine

ZHIBAOHUA Grinding and polishing machine
0 Reviews
$ 45.90
Qty:
In stock
30-day Return Policy, Learn More
Description
Voltage: 220V Power: 45W
Two-way rotation, timing, there are five speeds to choose from!
Machine size (CM): 21*16*10;
Bucket size: Length (CM): 14.5 Diameter (CM): 15





After each grinding is completed, the carrier plate and the grinding plate should be thoroughly cleaned with clean water, otherwise, the residual abrasive and polishing liquid will dry, harden or penetrate into the grinder and cause damage to the machine, while avoiding residue The abrasive or polishing liquid will cause pollution to the next grinding and polishing. Avoid flushing with excessive water flow during cleaning. After long-term use, the residual abrasive deposited in the lower sink of the equipment should be cleaned up in time to prevent excessive abrasive residue from blocking the drain and causing water to flow back into the motor. Regularly check whether the transmission parts of the grinding and polishing machine are defective or loose, and check the oil quantity at each oil injection port of the equipment, and deal with it in time to avoid affecting the grinding and polishing accuracy. It should also be noted that in daily use, avoid placing hard objects with sharp corners on the device to avoid knocking off the paint or even squatting on the device. After use, wipe the device with a clean cloth and blow dry to avoid rusting of some rust-prone parts.


Special reminder: The main function of the barrel polishing machine is to remove burrs, chamfering and basic polishing on the surface of the jewelry, but it cannot achieve the mirror effect. After polishing, the polishing beads will hit the jewellery, inevitably leaving slight bumps in the polishing marks. Manually polish again to remove traces to achieve a mirror effect.

Product Detail


customers reviews ( 0 )

0 / 5.0
5 stars 0%
4 stars 0%
3 stars 0%
2 stars 0%
1 stars 0%